Mobile water quality systems ready to ship — CALL TODAY 800.748.2322

VERDA Water Quality Systems
Cowboy hat visible from a deep hole in a desert landscape, illustrating the need to stop repeating ineffective maintenance and address the real SPD water failure mode

In Part 1, we looked at a basic reliability lesson: the place where a problem appears is not always the place where the problem begins. Once the real failure mode is identified, another question follows: What should we do about it?

That is where maintenance strategy becomes more important than maintenance activity. Will Rogers is often credited with the line: “If you find yourself in a hole, the first thing to do is stop diggin’.”

It is good advice for Facilities teams too. Sometimes “digging” means replacing the same component again. In other cases, it means shortening a preventive-maintenance interval, adding another inspection, or creating more manual work. Those actions may be reasonable in the moment. However, if they do not change the failure mode, the Facilities department may simply be getting better at managing the consequence.

Reliability-centered maintenance asks us to stop and reconsider the strategy.


More Maintenance Is Not Always Better Maintenance

Facilities teams work with limited labor, time, and capital. Therefore, every maintenance activity has a cost. If a low-risk asset receives excessive attention, those resources are unavailable for systems where failure could affect uptime, throughput, or patient care.

So the right question is: “Which failure modes matter most, and what is the best way to control them?”

That is the logic behind reliability-centered maintenance. Not every asset deserves the same maintenance strategy. Just like, not every failure deserves the same response.


Think About Consequence First

Imagine two identical pumps. One serves an administrative area. The other supports a water system used in medical-device processing. Mechanically, the pumps may be the same. Operationally, however, they are very different. If the first pump fails, the consequence may be inconvenient. If the second pump fails, the effect may reach Sterile Processing operations. That difference matters.

Reliability-centered maintenance places the consequence of failure at the center of the decision. For SPD water, that means asking:

  • What process depends on this asset?
  • What happens if performance declines?
  • How quickly would the problem become visible?
  • Could we detect it before SPD feels the impact?
  • What would the operational cost of waiting be?

Those questions are more useful than simply asking when the next PM is due.


Water Systems Often Warn Us Before They Fail

Many water-system failures are not sudden. In many cases they seem to develop over time. For example, an RO system may continue to operate while rejection performance slowly declines. A softener may still produce water while capacity is being exhausted. Likewise, a filter may remain online while differential pressure rises. A sensor may continue reporting data even as calibration drifts.

In each case, the equipment is still “running.” However, that does not necessarily mean the system is performing reliably. That is why condition indicators matter. When deterioration leaves measurable evidence, Facilities has a choice. It can wait for the consequence. Or it can intervene while there is still time to manage the problem deliberately.


When Water Quality Becomes Labor

In a case from a hospital in the Midwest U.S., the SPD experienced persistent hard-water deposits on equipment, piping, and surgical instruments. The effects did not stay confined to water testing. Staff had to hand-clean instruments. SPD output fell. Water lines clogged. Cleaning chemistry became less effective. Meanwhile, equipment required additional maintenance. At that point, the issue was no longer just about water quality. It had become: labor, throughput, downtime, maintenance cost, and operational reliability.

If the same condition keeps producing those consequences, responding faster each time does not necessarily mean the system is being managed well. The better question is: What failure mode keeps creating this work?

This is where the Will Rogers idea becomes especially useful. Suppose an SPD repeatedly develops deposits. Facilities can clean the equipment more often. If valves continue to corrode, the team can keep replacing them. When instruments require additional manual cleaning, SPD can add labor. Each action may be necessary. However, if the underlying water condition remains unchanged, the organization has not removed the cause. Instead, it has added recurring cost around it.

That is what “digging the hole deeper” can look like in maintenance. Reliability-centered thinking asks whether the current strategy is actually changing the outcome. If it is not, then doing more of the same may not be the answer.


The Right Response Depends on the Failure Mode

There is no single best maintenance strategy.

A reliability-centered program may use several.

  1. Reactive maintenance can make sense when failure is inexpensive and has little operational consequence.
  2. Preventive maintenance works well when a failure pattern is predictable and scheduled intervention effectively reduces risk.
  3. Condition-based maintenance is useful when measurable indicators reveal deterioration.
  4. Predictive maintenance becomes valuable when trend data can identify a developing problem before functional failure occurs.

Sometimes, however, the correct answer is not maintenance at all. The better response may be redesign. It may be improved monitoring. It may be better pretreatment. Or it may mean eliminating a recurring system condition. The point is not to choose the most sophisticated strategy. The point is to choose the strategy that best manages the failure.


Data Should Help Us Prioritize

This is also where real-time monitoring becomes more meaningful. The purpose of monitoring is not to have another dashboard, it should help Facilities distinguish between: something that changed and something that requires action.

That requires context.

A single change in conductivity may mean little. However, a sustained upward trend combined with declining treatment performance and recurring SPD complaints may mean much more. Similarly, a minor variation in a low-consequence system may not deserve the same response as a similar change in a system supporting critical processing. Data becomes useful when it helps answer questions like:

  • What is changing?
  • What failure mode might it represent?
  • What happens if we wait?
  • What should take priority?

That is the bridge from monitoring to reliability.


This Makes the Leadership Conversation Stronger

Reliability-centered maintenance helps Facilities communicate upward and we’ve heard responses from both ends of the spectrum. Which of these two do you think received faster approval and cross-functional support from hospital leadership?: “This equipment needs work.” versus: “We have evidence of a developing failure mode in a system that supports medical-device processing, and we understand the consequence if it continues.”

The second statement gives leadership a clearer reason to act. In addition, it connects the maintenance request to: operational continuity, labor, asset life, throughput, risk, capital planning, and patient-care support. As a result, the decision becomes more defensible.


A Practical Way to Think About SPD Water Reliability

For SPD water, the sequence can be simple.

  1. Define the function. What must the system reliably provide?
  2. Identify the failure mode. How could the system stop delivering that function?
  3. Find the indicators. What measurable evidence would show that the failure is developing?
  4. Evaluate the consequence. What happens if the condition continues?
  5. Choose the strategy. Reactive, preventive, condition-based, predictive, redesign—or another response.

In practical terms, that is the value of reliability-centered maintenance.


The Goal Is Not More Work

Facilities teams do not need another reason to add work. They need better ways to decide which work matters. That is why the most important question in Part 2 is not: “What else can we do?” Instead, ask: “Is what we are doing actually changing the outcome?”

If not, Will Rogers’ advice may be the right place to start. Stop diggin’. Find the failure mode. Then understand the consequence. Finally, choose the maintenance strategy that actually reduces the risk. For SPD water, that can mean the difference between repeatedly managing downstream symptoms and preventing the next operational disruption before Sterile Processing ever sees it.


Take the Next Step

How mature is your facility’s approach to SPD water reliability? Explore the VERDA Facilities Water Maturity Model to see how condition monitoring, trend analysis, shared accountability, and expert interpretation can help move water management from reactive response toward strategic infrastructure management.

Consultation Request - Talk With an Expert

Name(Required)
Email(Required)
Facility Type

Address(Required)