A passing water test is reassuring but it is also a snapshot.
It tells you what the water looked like at one location when the sample was collected. However, it does not necessarily tell you what happened before that sample, what may be changing now, or what the system will do tomorrow. That distinction matters in Sterile Processing.
A 2025 incident at a North American hospital offers a useful example. Staff began finding residue, spotting, and staining on reprocessed instruments. The hospital ultimately suspended portions of its on-site medical-device reprocessing operation while teams investigated the problem.
The lesson for Facilities is that periodic testing and continuous operational awareness are two different things.
A Water Problem That Did Not Stay Inside SPD
The first signs appeared in the Sterile Processing Department. Staff observed residue on processed items. Water testing showed harder-than-usual water, and the system was flushed.
At first, the issue appeared to be resolved. Then the problem returned. As the investigation continued, the hospital stopped automated washing and sterilization on site and relied on a partner hospital for reprocessing. As a result, the disruption affected far more than SPD. Ultimately, 165 surgeries were postponed, including 135 cataract procedures.
That is what turns an SPD water-quality problem into costly a hospital operations problem.
Testing Answers an Important Question
Water testing is essential, of course. A valid sample can show whether specific parameters met requirements at a particular point in time. That matters for verification, troubleshooting, documentation, and compliance. However, one passing test does not mean:
- the system is stable;
- conditions have not changed since the sample was collected;
- treatment equipment is performing consistently;
- a trend is not developing; or
- tomorrow’s result will look the same.
In short:
Testing tells you what you measured. It does not automatically tell you what the system is doing between measurements.
What Happens Between Samples?
Water systems are dynamic.
For example, incoming water conditions can vary, treatment equipment can lose performance, and maintenance events can affect system behavior. In addition, components can age and flow patterns can change. Periodic testing may capture some of those changes. However, it may not capture all of them as they happen.
Facilities teams already understand this concept. They do not manage temperature, pressure, electrical loads, or many other critical systems with an occasional measurement and assume nothing changes in between. SPD water deserves the same question: What is happening between the tests?
A Snapshot Is Not a Trend
Consider these two hospitals. At both, the latest water result was within specification.
Facility A had produced nearly identical results for months. By contrast, Facility B had moved steadily toward an action threshold with each successive measurement.
The latest result still passes. Yet the operational story is very different. A single value tells you where you are. A series of values can help show where you may be headed. That is why trending matters.
What Facilities Told Us at ASHE
VERDA’s 2026 ASHE survey showed strong interest in earlier visibility.
When respondents were asked which enhanced monitoring capabilities would provide the most value:
- 61% selected real-time alerts
- 50% selected predictive warnings before failures
- only 22% selected a centralized dashboard
In a separate question, 48% identified earlier detection of water-quality issues before operational impact as a leading benefit of enhanced monitoring.
That tells us something important. Facilities does not necessarily need another place to look at numbers. Instead, it needs to know when the numbers mean something.
Monitoring Should Lead to Action
This Hospital incident shows what can happen when those questions are not answered soon enough. Staff began seeing residue and staining on reprocessed instruments. Water testing later showed harder-than-usual water, and the system was flushed. However, the problem returned. As the investigation continued, the hospital ultimately had to stop automated washing and sterilization on site and rely on another hospital for reprocessing. The operational consequences were significant; 200+ procedures had to be postponed.
The problem is that the available information did not translate quickly enough into a stable, verified corrective response before the issue escalated into an operational disruption. A more proactive process would have asked:
- What is happening? Water hardness is moving outside normal performance or trending in a concerning direction.
- Why does it matter? The change may affect cleaning performance and contribute to residue or deposits on medical devices.
- What should happen next? Facilities should investigate the treatment system, review recent trends and maintenance history, identify the likely cause, take corrective action, and verify that water quality has returned to a stable condition before routine processing continues.
That is the difference between simply collecting data and using it to manage risk. The goal is not more numbers. The goal is earlier recognition, faster response, and verified control before the problem reaches the operating room schedule.
Testing and Monitoring Work Together
The goal is not to replace water testing with sensors. They serve different purposes.
Testing verifies. Monitoring watches. Trending provides context. Expert interpretation helps determine action.
Together, they create a more complete view of system performance.
Renee Vander Weele, Chief Commercial Officer at VERDA Water Quality Systems, describes the distinction this way: “A passing water quality test tells us where we are today, but a strong water quality program helps us anticipate where problems may emerge tomorrow. When Facilities and SPD understand the trends, recognize early warning signs, and know when to take action, water quality shifts from reactive testing to proactive risk management—allowing teams to address issues before they become operational problems.”
What This Hospital Situation Can Teach Us
In the past, this facility may have treated the incident as a simple failed test. From now on, they’ll bring together maintenance, clinical teams, outside experts, leadership, and contingency resources. They will document the problem, create backup reprocessing capacity, and work to improve system resilience.
That is a systems response.
The larger lesson is that when water is critical to medical-device processing, Facilities should understand:
- how the system normally performs;
- what changes deserve attention;
- who receives the information;
- when escalation occurs;
- what corrective action is required; and
- how the organization verifies that the system is stable again.
From Testing to Operational Control
The VERDA Facilities Water Maturity Model describes this progression.
At the Aware level, testing and maintenance happen at planned intervals.
Once the organization reaches the Documented level, historical performance and trends become visible.
At the Managed level, thresholds and alerts help identify developing conditions that deserve attention.
Finally, at the Strategic level, trend data, equipment performance, and expert interpretation help anticipate risk and prioritize action.
Each step adds something a single test result cannot provide: context.
The Better Question
Instead of asking only: “Did the water pass?”
Facilities leaders should also ask: “Do we know whether the system is staying under control?”
Because the most valuable water-quality problem may be the one your organization identifies before Sterile Processing ever has to tell you something changed.
Take the Next Step
Where does your current SPD water-management program fall on the spectrum from Reactive to Strategic?
Explore the VERDA Facilities Water Maturity Model to see how testing, trending, monitoring, escalation, and cross-functional alignment can build toward a more proactive operating model.
